Wireless Router

Buy Wireless Router, You Can Find Best Review at Here.

Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server

Posted on | November 8, 2009 | 3 Comments

Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server

The Belkin High-Speed Mode Wireless G Router with Built-In USB Print Server shares your broadband Internet access with your connected computers and enables them to print wirelessly to your USB printer. With a Belkin Router as the central connection point of your network, your computers can share fi les and resources as well as print and get online, all at the same time.By achieving networking speeds that are faster than standard 802.11g, Belkin High-Speed Mode (HSM) networking products provide increased real-world networking speeds. This means you will see overall speed improvements in mixed-mode networking environments where other 802.11g devices may be present. HSM offers even faster speeds in pure HSM environments. HSM tech (more…)

Category: belkin wireless router
Tags: > > > > > > > > >

Comments

3 Responses to “Belkin F5D7231-4P High-Speed Mode Wireless G Router with Built-In USB Print Server”

  1. Amory
    November 9th, 2009 @ 4:05 am

    Don’t get me wrong… this router works great, as a router. But not as a print server. Very few printers are supported, and Belkin doesn’t tell you that until after you buy it. So bottom line, make sure you check and see if your printer is supported before you buy this for a print server. Mine didn’t make the list.

    http://web.belkin.com/support/printserver/list.asp

  2. Batson
    November 9th, 2009 @ 4:55 am

    I purchased is Belkin when my DLink 713P died (twice). I wanted to go with a brand that was a little more reliable. The Belkin is great! I connect at 54ish mbps and also can connect to my work’s VPN; a telecommuters dream – no more dial up. Those who are in to convenience, it is not as user friendly as the Linksys systems, but wait, Linksys does not offer a unit with 802.11g speed, 4 ports, and a print server. This is the one.

  3. Idalis
    November 9th, 2009 @ 11:56 am

    This is my 4th router, and it’s by far the best one. The previous one I had was a D-Link. The one before that – Linksys. And my first one was a Netgear. Netgear was just plain bad. Maybe it’s because it was one of the first ones in its line. Maybe it was something else. I don’t know… and I don’t care. I got rid of it fast, and got myself a Linksys. For the most part, I was pretty happy with it. The setup was fairly easy and pretty straight forward. A few questions/problems that I’ve had over time that I owned it, were answered by Linksys support in professional and timely manner. It was a nice and reliable product. But the time came to upgrade it, and I decided to try something new. D-Link was my next choice. The router itself also wasn’t bad, although the setup was a bit more challenging, and the product itself was not as user-friendly as Linksys. I would probably still keep it, despite a few minor inconveniences. What finally made me give it up and look for another one was D-Link’s support, which is virtually non-existent and useless for the most part. I own several different D-Link’s products, and they are all not bad products, but god forbid you have a problem – you’ll have to jump through hoops to get help, and in the end will have to solve the problem yourself anyway… but that’s another story. Let’s get back to this Belkin router. I did a lot of research before going with Belkin. A few things that made me make a final decision were the fact that it comes with a built in USB Print Server, and that it also supports Windows Connect Now technology. Here is a little summary of what I like about Belkin and why I recommend it to other people:

    Setup – Like a walk in a park… Fast and painless. Especially if you are upgrading from another router. Like I already mentioned, it supports Windows Connect Now technology through its’ USB port. I saved my wireless settings (using Wireless Network Wizard on my Windows XP SP2 laptop) to a USB flash drive, and then just plugged it into the USB port on Belkin router. That’s it. In a few seconds the settings were saved, and I was all set. If you don’t have another router, it’s not that bad either. Just follow the wizard from the included installation CD, and you’ll be up and running in no time. Then, you can also take advantage of Windows Connect Now – plug USB flash drive into the router’s USB port to save the settings on it, and then easily add any number of computers/others products to the network. Beautiful, isn’t it?! Print Server installation was just as easy. I have a 5 in 1 printer/scanner/fax machine from Brother (model MFC 3100C), and it worked like a charm. Using the same installation CD, I followed the steps, and in 2 minutes I was sending jobs wirelessly to my printer. Totally awesome!

    Performance – Beats any other router that I’ve had/tried. I would highly recommend though to use it in conjunction with Belkin card (I got Belkin Wireless G Card F5D7011) to get the most out of the router’s capabilities. It’s probably 25% faster than the D-Link that I had before.

    Features – I’m going to repeat myself here, but where else are you going to find a router that has a built-in print server, supports Windows Connect Now, and has the speed of up to 125Mbps, not to mention VPN support and Mac compatibility. Belkin is the one.

    Web Interface – Like I said before, this is my 4th router. Prior to this one, I would probably say that Linksys had the best and most user-friendly web browser interface. Belkin’s is just as good. It’s very self-explanatory and easy to use. Great Help is available too.

    Support – I have not had any problems so far, so I have yet to contact Belkin support and can’t really say if they are good or bad. I have heard from other people though that they are excellent.

    To summarize everything that’s already been said, I think it’s a great router. In fact, for the price, you get two products in one – a router, and a print server. Nice deal, indeed.

    Tips – Here is a few pointers for a smooth installation:

    1. If you are installing a network card adapter (which I highly recommend you do, check out Belkin F5D7011 card) together with a router, make sure you install and configure the router first. Trust me on this one.

    2. When installing/configuring Print Server, make sure you have your printer drivers already installed.

    That’s it. Enjoy!